All listings for: Provost1
| Photo |
Title
| State | Price | |
 |
MVVS 1.5cc Diesel
Engine has not been mounted or run, it includes the additional RC carb. Turns freely with good compression. | Western Australia | - | $130 AUD |
 |
PAW .8cc Classic single port High Torque
Quite a rare engine with the single rear exhaust port, not many were manufactured. This one has been bench run. Compression and bearings are excellent. | Western Australia | - | $160 AUD |
 |
Taifun 2.5cc diesel
Good compression & bearings. Anodising faded & a few scratches on the cylinder fins (possibly plier abuse!) | Western Australia | - | $90 AUD |
 | 
Norvel .061 Glow engine
Good compression and bearings. Engine doesn’t seem to have done much work. | Western Australia | - | $60 AUD |
 |
Trexler Air Wheels No5 and No10
The price is for both sets. No5 are 2¼ inch and No10 are 3½ inch. They have never been inflated, and the rubber still smells fresh. Instructions are still in the boxes. | Western Australia | - | $60 AUD |
 |
G mark 061 RC glow engine
This engine may have been bench run. It is gummed up, but the throttle moves with the gummy oil, so the rest of the engine is probably the same. Original instructions are included. | Western Australia | - | $100 AUD |
 |
Spark Ignition Conversion Kit
Convert a glow plug engine to spark ignition to run on petrol (or use methanol if preferred). Kit includes magnet, hall sensor, ignition control unit, ignition coil and spark plug lead. Original printed instructions to carry out conversion are also included. | Western Australia | - | $110 AUD |
 |
Gannet 15cc four stroke petrol boat engines
Price is for both engines. Manufactured in the late 50s/early 60s. Two engines here, one is complete with original float bowl & appears to have had very little use. Magneto works & there is spark, bearings & compression feel good. The other had been damaged sometime in its life. The crankcase has been repaired, the other repairs still required... | Western Australia | - | $650 AUD |
 |
Gannet 15cc two stroke Glow boat engine
Manufactured in the late 50s/early 60s, & appears to have had little use. Good compression with a finger over the plug hole. Bearings feel a little notchy, could probably do with being changed if the engine is to be used. Carb barrel moves & has sticky oil on it. | Western Australia | - | $250 AUD |
 |
Lolo RC kit
Unstarted laser cut kit 30 inch (762mm) span for electric power. I originally bought this to power it with a .5 to .75cc diesel. Originally kitted by Park Scale Models. | Western Australia | - | $100 AUD |